Meta35: Embed EXIF data in film-shot images, tweak Custom Setting Menus. By John Crane

Meta35: Embed EXIF data in film-shot images, tweak Custom Setting Menus.

By John Crane

Meta35-connection

Have you ever wondered how to embed EXIF data into your film-shot and computer scanned images? Are you one of the newly enlightened 35mm film shooters recently in possession of your dream, quasi-vintage film camera (think Nikon F100, Nikon F5, Canon EOS-1V or Minolta Maxxum) – but frustrated trying to figure out how to tweak its Custom Settings exactly how you want? You may have given up, resigning yourself to thinking, “some day someone will figure this out.” Well, that someone is Promote Systems, and thanks to the software company in Houston, Texas, your wait is over. Enter meta35, a new product allowing you to extract EXIF data your camera generates, import to the computer, then embed into the specific frame of film it corresponds to. Not only that, but Meta35 allows interaction with these old, beautiful film cameras Custom Setting Menus; tweak them, then re-export to the camera. Quickly, easily, and without any cryptic cheat sheets.

About a year ago I received an e-mail from a gentleman asking if the Nikon MV-1 Data Reader was the only game in town when it came to retrieving data off the Nikon F6. The answer at the time was, unfortunately, yes – as far as I knew. For those unfamiliar with the MV-1, it’s a glorified CF card reader in a black, velvet pouch that hooks up to the 10-pin ports on the Nikon F6, Nikon F5, Nikon F100 and Nikon N90S/F90X allowing the transfer of Exif data generated by the camera (when this option is activated, as in the case of the F100) – write that data as a tiny .txt file to a Compact Flash (CF) card, then transfer that data to the computer for further use. The MV-1 is perfect for what limited functionality if performs, but there are several downsides. One is cost; at close to $240 it feels dramatically over priced for what it is. Another downside is that it’s one-directional in the sense it’s designed simply to retrieve data stored in your camera and write it to a card. During that process it deletes the data from the camera’s memory. Yet another disadvantage to the MV-1 is they are tough to find – and will become tougher as time passes.

In the old days there was a piece of software called Nikon Photo Secretary, allowing interaction with the F5’s inner functions. I never used Photo Secretary so can’t speak precisely to what it did or didn’t do. It was released about the same time as the F5 and from the looks of things, designed primarily to interact with the CSM (Custom Settings Menu) of the F5, providing easier access to its inner secrets. Regardless, if you can even find it today, and/or a computer that’ll run it – you’d be lucky. So what’s left?

 

Fast forward a year to an e-mail from the same gentleman a year ago, asking if I’d be interested in trying a new product for extracting data from the F6. Enter meta35, from Promote Systems in Houston, Texas. Meta35 is a new product providing today’s film shooter with the data generated by their cameras, previously inaccessible. And in the case of a camera like the F100 where you actually have to tell the camera to record data (its default is “off”), meta35 is the only game in town allowing access to this function, buried deep in the camera’s brain to wake it up, fully realizing its potential.

Meta35 is a software/hardware solution for not only these vintage, Nikon film cameras (F100, F5, F6, N90S/F90X), but also Canon EOS-1V and Minolta (Maxxum, Dynax and Alpha) cameras as well (please see footnotes at end of article). The software component runs on both Windows and Apple OSX as a efficiently designed, standalone application. The 2-part hardware component consists of a small cable with the appropriate connecting head for your camera on one end and standard 3.5mm jack on the other that plugs into a small adapter which connects to the computer’s USB port. Meta35 is extremely simple to use, well designed and fully functional.

Think of the camera’s data in two separate buckets:

– First, the Exif data generated while shooting a roll of film
– Secondly, the camera’s Custom Settings Menus (CSM), allowing deeper, more custom interaction with the camera.

The one-driectional MV-1 is capable only of removing (and erasing) generated EXIF data from the camera. Meta35 is bi-directional in the sense it allows you to read and write information to and from the camera. In regards to Custom Setting Menus, in the past its been difficult or impossible to access that data without some sort of deciphering key explaining what CSM function is mapped to what code in the camera. Meta35 somehow cuts through to not only decypher each camera’s CSM info, but allows retrieval, editing on the computer, then re-exporting altered CSM settings back into to the camera.

In the case of the F6, Meta35 does not allow changing CSM settings on the camera – this is simply done using the F6’s Menu on the back. But if you’re an F5, F100 or N90S/F90X, Canon EOS-1 or Minotla Maxxum shooter you’ll appreciate being able to easily read and alter each Custom Setting in the camera, then push those settings back to the camera and be ready to go.

EXIF DATA: Retrieving and embedding Exif data

When it comes time to embedding EXIF data into your image, meta35 is more than up to the task. Here’s a quick snapshot of the process. There are also links to short, informative “how-to” videos available here.

1) Hook meta35 to the camera and turn the camera on
2) Launch the software
3) Import the Exif data from the camera
4) Locate and load the image directory you wish to work with
5) The software automatically matches the exif data frame with the proper image*
6) Enter the additional IPTC data at the bottom such as titles, locations, keywords, etc.
7) Click “embed data” button

and presto – your image now carries all the data generated when shot such as f-stop, shutter speed, time, date, camera brand/model, etc.

OK – that’s a best-case scenario. Here are a few things you’ll figure out during your use of meta35, each tied to the number above:

1) Hook meta35 to the camera and turn the camera on. Make sure when you’re finished using meta35 you physically disconnect the cable from the camera or it will eventually deplete your batteries.

2) Launch the software. No issues here. It will run on both Windows and Apple OSX computers and I never experienced a single stability issue.

3) Import Exif data from the camera. This begins a bit of a fork in the road: if you use the MV-1 for the F6 it’s set to actually delete EXIF data from the camera after finished writing to the card. This of course leaves no data on the camera for Meta35 to interact with. So if you’re in the position of having both the MV-1 and meta35, use meta35 first to extract the data from the camera. meta35 allows the option of leaving the data stored in camera after extraction. If you wish to go back later and use the MV-1 to extract the data file you can do it then.

*In case you’re wondering – as I was – whether meta35 can work with data already imported from the camera and living on your hard disc, the answer is yes (!)*

4 and 5) Locate and load the image directory you wish to work with. This is an important step that takes a lot for granted. Without getting into a workflow discussion, I’ll say this: for most compatible use across the board it’s best to work with JPEG images. Here’s why.

a) Though meta35 presently understands both TIF and JPEG’s, it’s more compatible with JPEG’s on both platforms. On the Apple platform there is an issue preventing the software from writing all the EXIF data to TIF files on Apple OSX. It does allow some information like shutter speed and aperture, but not other information like camera brand, camera model and some others. They’re working hard to figure this out and I have no doubt they will. But for now, use JPEG’s – especially if you’re in the Mac.

b) When you scan images from a roll of film, this process assumes a logical, sequential naming convention. I’ve written other articles on this in the past so won’t get into it again here. But if you randomly name your files willy nilly when scanning, it makes associating the proper image later with the proper frame’s EXIF data much more difficult. Meta35 uses a logical sequence-based method. It understands “frame 1” in the EXIF data – and expects you to identify “frame 1” in your image directory. Much of this is common sense – but Meta35 isn’t a mind-reader – it needs you to do your part too.

c) The good news is, once you’ve imported the image directory you want to work with, re-ordering images in the image pane is relatively simple if you’ve not been diligent in your naming conventions while scanning. It’s easy to re-order, or even omit and exclude images from syncing. It’s rare that I scan all 36 images in from a roll of film, leaving gaps between images. No worries for meta35. It allows you to either exclude the data file or the image, based on how you prefer to work.

6) Enter the additional ITPC data at the bottom such as titles, locations, etc. This is a nifty way of adding keywords, descriptions, titles to your images. In the case of the Copyright pane there’s an option to apply to whole roll, saving time of entering the same information repeatedly. Same with the time/date stamp – allowing you to time/date stamp the entire roll. It’s a bit laborious to copy and paste information across all 36 images, but it needs to be done at some point and meta35 provides the most concise and streamlined opportunity to work on a whole roll at once.

7) Click “embed data” button. As noted above, this action will embed all entered data into your images, with the exception of TIF’s on the Mac, which embeds only some of it. The image is then permanently joined to its shooting data. When you open the image in other software such as Lightroom, Photoshop, or DxO Optics the data is there.

CSM Settings: Retrieving, Altering and Exporting Custom Settings from/to the camera:

Working with the camera’s custom settings menu is a breeze with meta35. As noted earlier, when altering the F6’s Custom Settings you’ll continue to do so on the camera’s menu itself. But for other cameras such as the F5, F100 or N90X/S, meta35 makes customizing the camera’s functions a breeze. Here’s the overview:

1) Connect the camera to the computer
2) Launch the software
3) Once the camera is located by the software, click “Import from Camera”
4) The camera’s Custom Settings appear within the software. Make whatever changes you wish. You’ll see short explanations associated with each setting if you need more information.
5) When complete, click “Export to Camera” and the camera is now updated.
6) Disconnect the camera.

It’s really that easy. No deciphering cryptic keys, or trying to memorize codes in the camera and what they mean. All information is clearly presented in the software as readable, easy to understand information.

OVERVIEW SUMMARY

Meta35 is a combination of software and hardware that lets photographers download shooting data from compatible cameras, embed the data into the EXIF metadata of scanned images and configure the cameras built in custom functions to optimize settings to the photographer’s needs. For version 1 software it’s robust, stable, well thought through and fully functional. It will be exciting to see where Promote Systems takes it from here.

Compatibility:

Meta35 is compatible with the following film cameras that record data: Canon EOS-1V, Nikon F100, F5, F6(1), F90X, N90S, Minolta Maxxum/Dynax/Alpha 7(1,2) and Maxxum/Dynax/Alpha 9(1 ,3).

1. Custom functions can be set directly on the camera.
2. Requires Minolta DS-100 data saver.
3. Requires Minolta DM-9 memory data back.

Features:

– transfer film shooting data from the camera directly to a MAC or PC
– embed the shooting data into the EXIF metadata of the scanned images
– set up and customize camera custom functions

Meta35 retails for $149 for Nikon, Canon and Minolta versions, and is available for both Windows and Apple OSX computers. For more information please visit Promote System’s web site at meta35.com

Also check out the Nikon F6 Project!

4 Comments

  1. This is awesome for people with these cameras but if you have anything else there are several good Lightroom plugins that will allow you to do the same thing but of course you will have had to make note of your settings.

    I use the free SimpleNote (works on almost all platforms) on iOS and web to do that as I shoot or after a photos session and then use the free and excellent pyExifToolGUI or directly in Lightroom to add in at least name the camera and lens names and hopefully shutter speed, aperture, GPS latlong plus film details in the EXIF.

    It’s not as easy as the above by any stretch but it works for every camera and helps when uploading to Flickr as the EXIF shows your camera/lens rather than your scanner details. Also helps in Lightroom as you can do smart albums on camera or lens details to find the shots you took with your Leica M6 and 35 Summicron last year or whatever.

  2. Interesting stuff for sure! But I’m afraid my film cameras, amongst which a mint F2AS, are too dimwitted to grasp what this little marvel can do…

  3. Wow. I’ve shot both a Canon 1V and Nikon F5 for years. It’s just what I need and it’s great to see a company still supporting us film shooters

  4. Thanks for the review!
    I’ve been considering getting one for a while now.
    Still on the fence ’cause it costs nearly as much as (some of) the cameras it works with 🙂

Comments are closed.